Enable™ 3505MC

About
Enable 3505MC is a medium density metallocene ethylene-hexene copolymer. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Easier processing and excellent properties lead to significant high pressure LDPE replacement in many applications, yet with superior drawdown and enhanced toughness. Enable 3505MC is TNPP-free.

Product Description
Supplier	ExxonMobil
Generic	mPE
Material Status	Commercial: Active
Availabilitys	Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	ExxonMobil Method
Melt Flow Rate
190℃，2.16kg	0.50	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus
1% secant, MD	426	MPa
1% secant, TD	519	MPa
tensile strength
MD, yield	16.9	MPa
TD, yield	19.5	MPa
MD, fracture	57.8	MPa
TD, fracture	47.6	MPa
Tensile strain
MD, fracture	550	%
TD, fracture	810	%
Drop hammer impact	< 75	g	ASTM D1709
Elmandorf tear strength
MD	19	g
TD	610	g

optical performance	Nominal value	Unit	Test method
gloss
45°	40		ASTM D2457
Haze	14	%	ASTM D1003

Legal Statement	Nominal value	Unit	Test method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.