| About |
|---|
| Heat Resistant Copolyester, Blow Molding Grade&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | TPC-ES |
| Material Status | Commercial: Active |
| Features | Heat Resistance, Good |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，10.0kg | 25 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 206 | ℃ | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 3 seconds | 61 | ISO 868 | |
| Tensile modulus | 265 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 23.4 | MPa | |
| fracture | 50.0 | MPa | |
| 5% strain | 14.3 | MPa | |
| 5% strain | 12.0 | MPa | |
| 10% strain | 19.4 | MPa | |
| 10% strain | 17.0 | MPa | |
| 50% strain | 23.0 | MPa | |
| 50% strain | 20.0 | MPa | |
| 100% strain | 21.6 | MPa | |
| 100% strain | 20.0 | MPa | |
| Tensile strain | |||
| fracture | 640 | % | ISO 527-2 |
| Nominal tensile fracture strain | 330 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. die cutting |
| 3. (10°C/min) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |