EPDM 722P - SOLIAO

About
EPDM 722P is a semi-crystalline, very low diene-containing polymer with low viscosity for good processability. The low unsaturation provides excellent long term thermal and UV stability. It is specially designed for medium voltage wire and cable applications. It can also be used in peroxide cured molded and other extruded applications. EPDM 722P is developmental and made via INSITE* technology. Main Characteristics: Semi-crystalline Very low diene Low molecular weight Heat and UV stable Applications: Medium voltage wire and cable Peroxide cured, heat resistant moldings Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 175.105 (Adhesives only). EU, No 10/2011 Consult the regulations for complete details.&&

About

EPDM 722P is a semi-crystalline, very low diene-containing polymer with low viscosity for good processability. The low unsaturation provides excellent long term thermal and UV stability. It is specially designed for medium voltage wire and cable applications. It can also be used in peroxide cured molded and other extruded applications. EPDM 722P is developmental and made via INSITE* technology. Main Characteristics: Semi-crystalline Very low diene Low molecular weight Heat and UV stable Applications: Medium voltage wire and cable Peroxide cured, heat resistant moldings Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 175.105 (Adhesives only). EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Features	Weather resistance is good
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	15 to 23	MU	ASTM D1646
Ethylene composition	68.5 to 72.5	wt%	ASTM D3900
Ethylidene norbornene content	0.1 to 1.0	wt%	ASTM D6047
Propylene content	29.0	wt%	ASTM D3900
Residual conversion metal	< 10	ppm	Internal Method
molecular weight distribution	Medium		Internal Method
Ash Content	< 0.1	%	ASTM D5667
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.