Entira™ HPE 100

About
Entira™ HPE 100 resin is a rubbery ethylene copolymer based material showing high chemical resistance, temperature resistance (when crosslinked) and flexibility at low temperatures. Entira™ HPE elastomers are typically used as the base polymer for a thermoset elastomer compound. Composition: Proprietary Compound Characteristics / Benefits: Compounds made from Entira™ HPE normally use a peroxide curing system and can develop good properties only after a cure step. Alternatively they can be crosslinked through exposure to electron beams. Applications: Wire & Cable: example uses; offshore, nuclear power plants, windmills, ships & marine, buildings. and other demanding environments. Also for use in: foams, footwear, polymer modification, adhesives, automotive under-the-hood and textile coating&&

About

Entira™ HPE 100 resin is a rubbery ethylene copolymer based material showing high chemical resistance, temperature resistance (when crosslinked) and flexibility at low temperatures. Entira™ HPE elastomers are typically used as the base polymer for a thermoset elastomer compound. Composition: Proprietary Compound Characteristics / Benefits: Compounds made from Entira™ HPE normally use a peroxide curing system and can develop good properties only after a cure step. Alternatively they can be crosslinked through exposure to electron beams. Applications: Wire & Cable: example uses; offshore, nuclear power plants, windmills, ships & marine, buildings. and other demanding environments. Also for use in: foams, footwear, polymer modification, adhesives, automotive under-the-hood and textile coating&&

Product Description
Supplier	DOW
Generic	Ethylene copolymer
Material Status	Commercial: Negative
Features	High Heat Resistance,Low temperature toughness,Solvent resistance
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.980	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	6.6	g/10min	ASTM D1238
Mooney viscosity
ML 1+4，100℃	15	MU	ASTM D1646

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-29.0	℃	ASTM D1238
Melting temperature
DSC	49.0	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Processing temperature
Maximum	230	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.