| About |
|---|
| Aramco PP CP9ON是一种聚丙烯嵌段共聚物，通常用于工业注塑。用这种树脂制成的模压件通常具有良好的冲击性能、高刚度和热稳定性。 |
| Product Description | |
|---|---|
| Supplier | Aramco |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Low contractility,Good tear strength,HB |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 9.0 | g/10min | ASTM D1238 |
| Density | 0.9 | g/cm³ | ASTM D792 Method A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 28 | MPa | ASTM D638 |
| fracture | 15 | MPa | ASTM D638 |
| Bending modulus | 1530 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 96 | ASTM D785 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 10N | 153 | ℃ | ASTM D1525 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 10 | kJ/m² | ASTM D256 |
| -20℃ | 5 | kJ/m² | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |