LUXI LXTY1603

About
鲁西集团通用级PC系列,透明颗粒,可用于挤出、注塑、吹塑、改性等。

Product Description
SupplierLUXI
GenericPolycarbonate
Material StatusCommercial: Active
FeaturesGood Clarity

Technical Data
PHYSICALNominal valueUnitTest method
molecular weight
GPC absolute molecular weight35000
Melt Flow Rate
300℃,1.20kg3.0g/10minISO 1133
Density1.2g/cm³ISO 1183
Water absorption rate
23℃,24hr0.2%ISO 62
Shrinkage rate
MD:2.0 mm0.5-0.7%ISO 294

MECHANICALNominal valueUnitTest method
tensile strength
50 mm/min
Tensile strain
yield60MPaISO 527
fracture72MPaISO 527
Fracture, 50 mm/min>120%ISO 527
Tensile modulus
1 mm/min2400MPaISO 527
bending strength
2 mm/min90MPaISO 178
Bending modulus
2 mm/mim2300MPaISO 178

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed, 4.0 mm125ISO 75
Vicat Softening Temp
B120, unannealed, 4.0mm145ISO 306

optical performanceNominal valueUnitTest method
Transmittance
3.2 mm89.0%ASTM D1003
Haze
3.2 mm<0.5%ASTM D1003
Yellow index
380-780nm<1.4ISO 17223

Electrical performanceNominal valueUnitTest method
Volumetric resistance coefficient
5min3.0×10^17Ω-cmIEC 60093
Dielectric constant
1 MHz2.7IEC 60250
Dielectric strength
1 mm30kV/mmIEC 60243
Dielectric loss factor
1MHZ0.015IEC 60250

otherNominal valueUnitTest method
Flame retardant level
1.50 mmHBUL 94

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength
23℃82kJ/m²ISO 179
Impact strength of cantilever beam notch
23℃75kJ/m²ISO 180

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.