AA-Recoplast A3H1

About
Pellets for Wood Plastic Composite AA-Recoplast designed to offer excellent stiffness, low warping, good/acceptable toughness, and good moldability (extrudability). This resin is ideally suited for extrusion of wood plastic composite profiles. Regulatory status AA-Recoplast grades – 100% Recyclable.&&

Product Description
Generic	PE
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good flexibility,Renewable resources
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930 to 0.970	g/cm³	ISO 1183
Apparent density	0.50 to 0.53	g/cm³	ISO 60
Melt Flow Rate
190℃，2.16kg	3.5 to 3.8	g/10min	ISO 1133
Shrinkage rate	0.012	%
Water absorption rate
Equilibrium, 23 ℃, 50% RH	0.20 to 0.40	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	> 1500	MPa	ISO 527-2
tensile strength
fracture	> 14.0	MPa	ISO 527-2
Tensile strain
fracture	> 26	%	ISO 527-2

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	180 to 190	°C
Barrel 2 zone temperature	180 to 190	°C
Barrel 3 zone temperature	180 to 190	°C
Melt temperature	140 to 210	°C
Nozzle temperature	180 to 190	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.