ABS Proquigel X-17

About
Offers higher heat resistance than X-11. Recommended where impact resistance is secondary to heat resistance. Main automotive applications include instrument panel parts, from and rear lamp housings and upper rear quarter trim panels. ABS Proquigel X-17 has also been used for producing portable hair dryers and coffee making units.&&

Product Description
Generic	ABS
Material Status	Commercial: Active
Features	High impact resistance,High Heat Resistance,HB
Availabilitys	North America
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	0.70	g/10min	ASTM D1238
Shrinkage rate
MD	0.50	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
23℃，3.2mm	240	J/m	ASTM D256
23℃，6.2mm	200	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	93.0	℃	ASTM D648
Vicat Softening Temp	114	℃	ASTM D1525

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	107		ASTM D785
tensile strength
fracture	50.0	MPa	ASTM D638
Tensile strain
fracture	30	%	ASTM D638
Bending modulus	2400	MPa	ASTM D790
bending strength
fracture	75.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.