| About |
|---|
| Abstron KU602M is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific. Characteristics include: Flame Rated Heat Resistant Rigid&& |
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,High Heat Resistance,HB |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 220℃，10.0kg | 6.0 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.30 to 0.50 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 23 ℃, 3.2mm, injection molding | 150 | J/m | ASTM D256 |
| 23 ℃, 6.4mm, injection molding | 120 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed, 6.4 mm, injection molded | 105 | ℃ | ASTM D648-A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.20 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 106 | ASTM D785 | |
| tensile strength | ASTM D638 | ||
| Yield, 3.20 mm, injection molding | 47.1 | MPa | ASTM D638 |
| Yield, 3.20 mm, injection molding | 52.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 6.40 mm, injection molded | 2160 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 6.40 mm, injection molded | 68.6 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I, 2.0 in/min |
| 3. Type I, 0.20 in/min |
| 4. 0.20 in/min |
| 5. Annealed at 95°C for 2 hr |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |