Absylux® FR - SOLIAO

About
Absylux ABS is a low cost engineering plastic that is easy to machine and fabricate. Absylux is an ideal material for structural applications when impact resistance, strength, and stiffness are required. It is widely used for machining pre-production prototypes since it has excellent dimensional stability and is easy to paint and glue. Natural (beige) and black Absylux are FDA compliant for use in food processing applications. Applications Include: Machined prototypes Structural components Support blocks Housings Covers Advantages of Absylux: Excellent impact resistance Good machinability Excellent aesthetic qualities Easy to paint and glue Good strength and stiffness Low cost&&

About

Absylux ABS is a low cost engineering plastic that is easy to machine and fabricate. Absylux is an ideal material for structural applications when impact resistance, strength, and stiffness are required. It is widely used for machining pre-production prototypes since it has excellent dimensional stability and is easy to paint and glue. Natural (beige) and black Absylux are FDA compliant for use in food processing applications. Applications Include: Machined prototypes Structural components Support blocks Housings Covers Advantages of Absylux: Excellent impact resistance Good machinability Excellent aesthetic qualities Easy to paint and glue Good strength and stiffness Low cost&&

Product Description
Supplier	Westlake Plastics
Generic	ABS
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High impact resistance,Good Dimensional Stability,Sprayable,Machinable,Food contact compliance,V-0,5VA
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	210	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	72.8	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.60 mm	V-0	UL 94
2.50 mm	5VA	UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	100		ASTM D785
Tensile modulus	2210	MPa	ASTM D638
tensile strength
yield	38.1	MPa	ASTM D638
Bending modulus	2070	MPa	ASTM D790
bending strength
yield	60.7	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.