| About |
|---|
| Features Tough and durable Resists breakage and handles challenging functional assemblies Great for snap fits, assemblies and demanding applications Ideal for master patterns for vacuum casting&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Ultra high toughness,Durability |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.13 | g/cm³ | |
| — | 1.19 | g/cm³ | |
| viscosity | |||
| 30℃ | 0.25 to 0.3 | Pa·s | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1790 to 1980 | MPa | ASTM D638 |
| tensile strength | 38.0 to 44.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 14 to 22 | % | ASTM D638 |
| Bending modulus | 1520 to 2070 | MPa | ASTM D790 |
| bending strength | 52.0 to 71.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 35 to 52 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 62.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 54.0 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Critical Exposure | 11.7 | mJ/cm² | |
| Penetration depth | 104.1 | µm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid, 25°C |
| 3. Solid, 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |