| About |
|---|
| ACLAR® 22C is a Polychlorotrifluoroethylene (PCTFE) product. It can be processed by encapsulating or thermoforming and is available in North America. Applications of ACLAR® 22C include coating applications, film, food contact applications and packaging. Characteristics include: Flame Rated Chemical Resistant Clarity Copolymer Flame Retardant&& |
| Product Description | |
|---|---|
| Supplier | Honeywell |
| Generic | PCTFE |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good flexibility,Good heat sealing,Good Dimensional Stability,Good disinfection,Flame Characteristics,Moisture resistance,Copolymer,Solvent resistance,Insulation,VTM-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.11 | g/cm³ | ASTM D1505 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 190 | µm | |
| Secant modulus | ASTM D882 | ||
| 1% secant, MD | 1000 | MPa | ASTM D882 |
| 1% secant, TD | 1000 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 34.5 | MPa | ASTM D882 |
| TD, yield | 34.5 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 250 | % | ASTM D882 |
| TD, fracture | 250 | % | ASTM D882 |
| Drop hammer impact | 1200 | g | ASTM D1709 |
| Elmandorf tear strength | ASTM D1922 | ||
| MD | 1600 | g | ASTM D1922 |
| TD | 1600 | g | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.22 | W/m/K | ASTM C177 |
| Relative temperature index | |||
| Electrical performance, 0.14 mm | 50.0 | ℃ | UL 746 |
| 0.14 mm | 50.0 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+16 | ohms | ASTM D257 |
| Volume resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Arc resistance | |||
| 0.10 mm | 135 | sec | ASTM D495 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.40 mm | VTM-0 | UL 94 | |
| Extreme oxygen index | 100 | % | ASTM D2863 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 1.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |