ACRYLITE® Film 0F063

About
ACRYLITE® Film 0F063 is a very high weather resistant and transparent acrylic film for graphic printings and lamination systems. Due to its excellent performance under weathering and UV light exposure, ACRYLITE® Film 0F063 does not present color change or yellowing. Therefore it provides high protection of polymeric substrates from degradation caused by UV radiation. Its very smooth surface leads the film to have a good optical quality surface. Application ACRYLITE® Film 0F063 is suitable as top layer for high UV and weathering protection of different polymeric substrates including ones based on Fiber Reinforced Polyester Resin. ACRYLITE® Film 0F063 can be used to be printed on as good quality film decoration and then laminated on different polymeric films or sheets. Laminated decoration films based on ACRYLITE® are suitable for a wide range of molding processes such as thermoforming and insert molding.&&

About

ACRYLITE® Film 0F063 is a very high weather resistant and transparent acrylic film for graphic printings and lamination systems. Due to its excellent performance under weathering and UV light exposure, ACRYLITE® Film 0F063 does not present color change or yellowing. Therefore it provides high protection of polymeric substrates from degradation caused by UV radiation. Its very smooth surface leads the film to have a good optical quality surface. Application ACRYLITE® Film 0F063 is suitable as top layer for high UV and weathering protection of different polymeric substrates including ones based on Fiber Reinforced Polyester Resin. ACRYLITE® Film 0F063 can be used to be printed on as good quality film decoration and then laminated on different polymeric films or sheets. Laminated decoration films based on ACRYLITE® are suitable for a wide range of molding processes such as thermoforming and insert molding.&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Optical performance,Good Printability
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	DIN 53479
surface tension	50	mN/m	DIN 53364

film	Nominal value	Unit	Test method
tensile strength
yield	62.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
yield	7.0	%	ISO 527-3
fracture	21	%	ISO 527-3

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	114	℃	ISO 11357-2

optical performance	Nominal value	Unit	Test method
Refractive index	1.490		ISO 489
Transmittance	92.0	%	ISO 13468-2
UV Transmittance – 280 – 380 nm	< 1.0	%	DIN EN 410

Supplementary information	Nominal value	Unit	Test method
Accelerated weathering resistance
method A，cycle 1，65% RH	No Visible Change		ISO 4892-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.