ACRYLITE® LED White 0V200

About
ACRYLITE® LED White 0V200 is specifically engineered for uniform light distribution when backlit with strong LED light sources. Combined with high light transmission, the diffusion grade also has the ability to eliminate disturbing hotspots (spots of light created by the LED source). These properties make it possible to reduce the spacing required between the cover and the light source, optimizing the wall thickness of the component. ACRYLITE® LED White 0V200 has slightly higher light transmission than its counterpart (0V606), while still retaining the light diffusing nature of the grade. ACRYLITE® LED White 0V200 is characterized by diffuse scattering of light, and is offered in the following ACRYLITE® polymers: ACRYLITE® 8N, ACRYLITE® H12, ACRYLITE® H15, and ACRYLITE® Resist zkX. Typical properties of ACRYLITE® acrylic polymers are: excellent weather resistance high mechanical strength high surface hardness and mar resistance various melt flow rate&&

About

ACRYLITE® LED White 0V200 is specifically engineered for uniform light distribution when backlit with strong LED light sources. Combined with high light transmission, the diffusion grade also has the ability to eliminate disturbing hotspots (spots of light created by the LED source). These properties make it possible to reduce the spacing required between the cover and the light source, optimizing the wall thickness of the component. ACRYLITE® LED White 0V200 has slightly higher light transmission than its counterpart (0V606), while still retaining the light diffusing nature of the grade. ACRYLITE® LED White 0V200 is characterized by diffuse scattering of light, and is offered in the following ACRYLITE® polymers: ACRYLITE® 8N, ACRYLITE® H12, ACRYLITE® H15, and ACRYLITE® Resist zkX. Typical properties of ACRYLITE® acrylic polymers are: excellent weather resistance high mechanical strength high surface hardness and mar resistance various melt flow rate&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Low Light Diffusion,Good Clarity,Good Hardness,High scratch resistance
Availabilitys	North America
Process Methods	Extrusion

Technical Data
optical performance	Nominal value	Unit	Test method
Transmittance
1000 µm	73.0	%
2000 µm	55.0	%
3000 µm	45.0	%
4000 µm	38.0	%
Luminance
1.00 mm	< 114	cd/m²
2.00 mm	< 58.0	cd/m²
3.00 mm	< 44.0	cd/m²
4.00 mm	< 36.0	cd/m²

Supplementary information	Nominal value	Unit
Half-Value Angle
1.00 mm	37.0	°
2.00 mm	68.0	°
3.00 mm	73.0	°
4.00 mm	74.0	°
Scattering power
1.00 mm	0.460
2.00 mm	0.660
3.00 mm	0.760
4.00 mm	0.810

Notes
1. Typical properties: these are not to be construed as specifications.
2. D65
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.