ACRYLITE® Sheet Optical MR

About
ACRYLITE® Optical (MR) sheet is a continuously manufactured acrylic sheet that has excellent abrasion and chemical resistant properties with outstanding optical quality. It is available with coating on one side or two sides. While two-side coated sheet provides maximum protection, one-side coated sheet offers economical advantages for applications where only one side of the sheet is exposed. In addition, the uncoated side is ideal for silk screening. Applications ACRYLITE® Optical (MR) sheet is ideal for a wide variety of applications including: One-Sided Coating Glazing P-O-P Displays Store Fixtures Menu Boards Electronic Displays Museum Displays Signs & Directories Furniture & Interiors Framing Two-Sided Coating Sports Arena Glazing Architectural Glazing Security Glazing Automotive Interiors Instrument Cluster Panels&&

About

ACRYLITE® Optical (MR) sheet is a continuously manufactured acrylic sheet that has excellent abrasion and chemical resistant properties with outstanding optical quality. It is available with coating on one side or two sides. While two-side coated sheet provides maximum protection, one-side coated sheet offers economical advantages for applications where only one side of the sheet is exposed. In addition, the uncoated side is ideal for silk screening. Applications ACRYLITE® Optical (MR) sheet is ideal for a wide variety of applications including: One-Sided Coating Glazing P-O-P Displays Store Fixtures Menu Boards Electronic Displays Museum Displays Signs & Directories Furniture & Interiors Framing Two-Sided Coating Sports Arena Glazing Architectural Glazing Security Glazing Automotive Interiors Instrument Cluster Panels&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Optical performance,Good wear resistance,Solvent resistance,High scratch resistance
Availabilitys	North America

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2760	MPa	ASTM D638
tensile strength	68.9	MPa	ASTM D638
Tensile strain
fracture	4.5	%	ASTM D638
Bending modulus	3310	MPa	ASTM D790
bending strength	117	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	21	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	91.0	℃	ASTM D648
Vicat Softening Temp	104	℃	ASTM D1525
Linear coefficient of thermal expansion
MD	7.2E-5	1/℃	ASTM D696
Thermal conductivity coefficient	0.19	W/m/K	ASTM C177

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Burning rate	25	mm/min	ASTM D635
Autoignition temperature	443	℃	ASTM D1929
Smoke density	1.0	%	ASTM D2843

optical performance	Nominal value	Unit	Test method
Transmittance	92.0	%	ASTM D1003

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.