| About |
|---|
| ACRYLITE® Solar IM20 is an amorphous thermoplastic molding compound (PMMA). Typical properties of ACRYLITE® molding compounds are: Good flow High mechanical strength, surface hardness and abrasion resistance High light transmission Very good weather resistance Easy to process High heat resistance Special properties of ACRYLITE® Solar IM20 are: Adjusted transmission characteristics for photo voltaic applications (PV, CPV) Increase of power yield and module efficiency Prolonging lifetime of cells, lenses or covers. Application: Field of use is injection molding of optical and technical parts as well as extrusion of profiles and sheets.&& |
| Product Description | |
|---|---|
| Supplier | ROHM |
| Generic | PMMA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Excellent Processability,Good Clarity,Good liquidity,Good Hardness,High Heat Resistance,Good wear resistance,Amorphous |
| Availabilitys | North America |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 230℃，3.8 kg | 3.00 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3300 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 77.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 5.5 | % | ISO 527-2/5 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 20 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 103 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 98.0 | ℃ | ISO 75-2/A |
| Glass transition temperature | 117 | ℃ | IEC 10006 |
| Vicat Softening Temp | |||
| B50 | 108 | ℃ | ISO 306 |
| Linear coefficient of thermal expansion | |||
| MD：0~50℃ | 8.0E-5 | 1/℃ | ISO 11359-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | B2 | DIN 4102 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.490 | ISO 489 | |
| Transmittance | |||
| 3000 µm | 92.0 | % | ISO 13468-2 |
| Haze | |||
| 3000 µm | < 0.50 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. D65 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |