| About |
|---|
| Product Description | |
|---|---|
| Supplier | Mitsubishi |
| Generic | PMMA |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Bending modulus | 3300 | MPa | ISO 178 |
| Rockwell hardness | 100 | M 级 | ISO 2039 |
| Tensile modulus | |||
| 1A/1 | 3300 | MPa | ISO 527-2 |
| Tensile strain | |||
| 1A/5 | 7 | % | ISO 527-2 |
| Bending strength | 135 | MPa | ISO 178 |
| tensile strength | |||
| 1A/5 | 75 | MPa | ISO 527-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistance coefficient | >10e16 | Ω | JIS K-6911 |
| Volumetric resistance coefficient | >10e13 | Ωm | JIS K-6911 |
| Dielectric constant | |||
| 60 Hz | 3.7 | JIS K6911 | |
| Insulation breakdown strength | |||
| 4kV/sec | 20 | MV/m | JIS K-6911 |
| dielectric loss tangent | |||
| 60Hz | 0.05 | JIS K-6911 | |
| Arc resistance | 没有痕迹 | JIS K-6911 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | 6E-5 | /℃ | JIS K-7197 |
| Spiral flow | |||
| 2mm thickness, 250 ℃ | 200 | mm | |
| 2mm thickness, 230 ℃ | 120 | mm | |
| specific heat | 1.5 | J/(g ℃) | JIS K-7123 |
| Vicat Softening Temp | |||
| B50 | 101 | ℃ | ISO 306 |
| Hot deformation temperature | |||
| 1.8 MPa | 94 | ℃ | ISO 75-2 |
| Heat transfer rate | 0.2 | W/(m ℃) | JIS A-1412 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | |||
| 1eU | 21 | kJ/m² | JIS K-7111 |
| 1.5 | kJ/m² | JIS K-7111 | |
| 1A | 2.1 | kJ/m² | JIS K-7110 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Water absorption rate | |||
| 24hr | 0.3 | % | ISO 62 |
| Melt Flow Rate | |||
| 230℃，3.80kg | 1.5 | g/10min | ISO 1133 |
| Density | 1.19 | g/cm³ | ISO 1183 |
| Haze | |||
| 3 mm | 0.3 | % | ISO 14782 |
| Refractive index | |||
| Nd | 1.49 | ISO 489 | |
| Full light transmittance | |||
| 3 mm | 93 | % | ISO 13468-1 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |