| About |
|---|
| Product Description | |
|---|---|
| Supplier | Wanhua |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good coloring,weathering resistance,High scratch resistance,Good transparency |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ISO 1183 |
| Forming shrinkage rate | 0.2-0.6 | % | ISO 294 |
| Water absorption rate | |||
| 24 hr | 0.3 | % | ISO 62 |
| Melt Flow Rate | |||
| 230℃，3.8 Kg | 3.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 5 mm/min | 77 | MPa | ISO 527 |
| elongation | |||
| 5 mm/min | 6 | % | ISO 527 |
| Tensile modulus | |||
| 1 mm/min | 3300 | MPa | ISO 527 |
| bending strength | |||
| 2 mm/min | 120 | MPa | ISO 178 |
| Bending modulus | |||
| 2 mm/min | 3300 | MPa | ISO 178 |
| Rockwell hardness | |||
| M Scale | 100 | ISO 2039 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| V-shaped notch | 0.3 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | 20 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| B50 | 107 | ℃ | ISO 306 |
| Hot deformation temperature | |||
| 1.8 MPa | 101 | ℃ | ISO 75 |
| Linear coefficient of thermal expansion | 6E-5 | 1/℃ | ISO 11359 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | >1E16 | ohm | ASTM D257 |
| Volume resistivity | >1E13 | ohm·m | ASTM D257 |
| Dielectric strength | 20 | kV/mm | ASTM D149 |
| Dielectric constant | 3.7 | 60Hz | ASTM D150 |
| OPTICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 3 mm | >92 | % | ISO 13468 |
| Haze | |||
| 3 mm | <0.5 | % | ISO 14782 |
| Refractive index | 1.49 | ISO 489 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.0 mm | HB | calss | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |