About |
---|
Ad-Tech Epoxy CTC-110 is an Epoxy; Epoxide (Epoxy) product. It can be processed by casting, coating, or encapsulating and is available in North America. Applications of Ad-Tech Epoxy CTC-110 include coating applications and decorative parts. Characteristics include: Chemical Resistant Good Toughness High Gloss Moisture Resistant Scratch Resistant&& |
Product Description | |
---|---|
Generic | 环氧树脂 |
Material Status | Commercial: Active |
Features | Good flexibility,Good surface appearance,The fouling resistance,Low or no water absorption,Solvent resistance,High scratch resistance |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Apparent density | 1.05 | g/cm³ | ASTM D1895 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Thermosetting components | |||
resin | 按重量计算的混合比: 100 按容量计算的混合比: 1.0 | ||
Hardening method | 按重量计算的混合比: 85 按容量计算的混合比: 1.0 | ||
storage stability | |||
25 ℃ | 16 to 20 | min | |
Storage period | |||
25℃ | 52 | wk |
Thermosetting mixed viscosity | Nominal value | Unit | Test method |
---|---|---|---|
25℃ | 1900 | cP | ASTM D2393 |
stripping time | |||
25℃ | 2900 | min |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s D | 78 | ASTM D2240 | |
Tensile modulus | 2210 | MPa | ASTM D638 |
tensile strength | |||
yield | 39.0 | MPa | ASTM D638 |
Tensile strain | |||
yield | 4.1 | % | ASTM D638 |
Bending modulus | 1310 | MPa | ASTM D790 |
bending strength | |||
yield | 35.4 | MPa | ASTM D790 |
compressive strength | 62.8 | MPa | ASTM D695 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |