| About |
|---|
| Ad-Tech Epoxy EL-315-IHL is an Epoxy; Epoxide (Epoxy) product. It can be processed by laminating and is available in North America. Applications of Ad-Tech Epoxy EL-315-IHL include aerospace and coating applications. Primary characteristic: heat resistant.&& |
| Product Description | |
|---|---|
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Heat Stabilized |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | |||
| MD | 0.15 | % | ASTM D955 |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 87 | ASTM D2240 | |
| Tensile modulus | 13800 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 181 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 0.40 | % | ASTM D638 |
| Bending modulus | 9860 | MPa | ASTM D790 |
| compressive strength | 99.1 | MPa | ASTM D695 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 245 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 1.9E-5 | 1/℃ | ASTM D696 |
| Thermosetting components | |||
| resin | 按重量计算的混合比: 100 按容量计算的混合比: 100 | ||
| Hardening method | 按重量计算的混合比: 25 按容量计算的混合比: 24 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |