| About |
|---|
| Polyether Based&& |
| Product Description | |
|---|---|
| Generic | TSU |
| Material Status | Commercial: Active |
| Features | Good flexibility,Rapid solidification poin,Low Viscosity,Low contractility |
| Availabilitys | North America |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 1.06 | g/cm³ | ASTM D1895 |
| Shrinkage rate | |||
| MD | 0.025 | % | ASTM D955 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 39.4 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| resin | 按重量计算的混合比: 100 | ||
| Hardening method | 按重量计算的混合比: 100 | ||
| storage stability | |||
| 25 ℃ | 30 | min | |
| Storage period | |||
| 24℃ | 26 | wk |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 2800 | cP | ASTM D2393 |
| stripping time | |||
| 23℃ | 2900 | min | |
| 25℃ | 1400 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 60 | ASTM D2240 | |
| tensile strength | |||
| yield | 5.52 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 300 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |