| About |
|---|
| ADDILENE® J 490 M40 S is a Polypropylene Copolymer (PP Copolymer) material filled with 40% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Important attributes of ADDILENE® J 490 M40 S are: Flame Rated Flame Retardant Typical applications include: Electrical/Electronic Applications Industrial Applications&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,Halogenated |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 12 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 69.0 | ℃ | ISO 75-2/Af |
| Vicat Softening Temp | |||
| A50 | 152 | ℃ | ISO 306/A50 |
| Luminescent line test | 960 | ℃ | CEI 60695/2/1 |
| Melting temperature | 165-168 | ℃ | ISO 3146/C2 |
| Extreme oxygen index | 23 | % | ISO 4589 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volumetric resistance | >=1.0E+15 | Ω.cm | IEC 60093 |
| Surface resistance | >=1.0E+13 | Ω.cm | IEC 60093 |
| Insulation strength | 42.0 | KV/mm | IEC 60243-1 |
| Dissipation factor | |||
| Compared to the leakage tracing index | >=600 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.60 mm | V-2 | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 20 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 2.5 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | |||
| 23℃ | 2.5 | kJ/m² | ISO 180-1A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 72 | ISO 868 | |
| tensile strength | |||
| Fracture, 23 ℃ | 24.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 7.0 | % | ISO 527-2 |
| Elastic modulus | 3800 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |