Adflex X 500 F

About
Adflex X 500 F is a thermoplastic polyolefin which is typically used in co-extruded cast film and injection moulding applications. Adflex X 500 F features a high softness, a low modulus, high gloss and excellent clarity. It has been selected by customers for use in a central layer of tough transparent co-extruded cast-film structures. It can be blended with other transparent polyolefinic resins to improve the low temperature impact resistance maintaining the transparency of the film. Adflex X 500 F can be processed on conventional PP cast film lines. It is also suited for injection moulding applications where high transparency and good gloss combined with good flexibility is required like e.g. housewares and toys. It does not contain any slip nor anti-blocking agents.&&

About

Adflex X 500 F is a thermoplastic polyolefin which is typically used in co-extruded cast film and injection moulding applications. Adflex X 500 F features a high softness, a low modulus, high gloss and excellent clarity. It has been selected by customers for use in a central layer of tough transparent co-extruded cast-film structures. It can be blended with other transparent polyolefinic resins to improve the low temperature impact resistance maintaining the transparency of the film. Adflex X 500 F can be processed on conventional PP cast film lines. It is also suited for injection moulding applications where high transparency and good gloss combined with good flexibility is required like e.g. housewares and toys. It does not contain any slip nor anti-blocking agents.&&

Product Description
Supplier	LyondellBasell
Generic	聚烯烃，共挤薄膜用聚烯烃
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good Clarity,Good surface appearance,Food contact compliance,High Heat Resistance,Soft,low-temperature impact resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ISO 1183/A
Melt Flow Rate
230℃，2.16kg	7.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	14.0	MPa	ISO 527-2
Tensile strain
fracture	500	%	ISO 527-2
Bending modulus	470	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/1A
-40℃	14	kJ/m²	ISO 180-1A
-20℃	65	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	60.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	94.0	℃	ISO 306/A50

optical performance	Nominal value	Unit	Test method
gloss
45°，50 µm	> 60		ASTM D2457
Haze
50 µm	13	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.