Adiprene® LFP 3940A

About
ADIPRENE LFP 3940A is a PPDI-terminated polycarbonate prepolymer having very low free PPDI content (typical < 0.1%) for easier management of health and safety during handling. ADIPRENE LFP 3940A yields high performance 93-96 Shore A hardness elastomers when cured with VIBRACURE® A 250 or HQEE. The high performance features of ADIPRENE LFP 3940A are due to PPDI (p-phenylene diisocyanate), a special building block that imparts exceptional properties to cast polyurethane elastomers. The unique combination of properties exhibited by PPDI-based prepolymers is superior to those available from standard prepolymers based on TDI or MDI. Features of ADIPRENE LFP 3940A include: Low Free PPDI Content Excellent hydrolytic stability, oil stability and thermal stability Long Pour Life Excellent Dynamics Good Tensile/Tear Strength Excellent Resilience&&

About

ADIPRENE LFP 3940A is a PPDI-terminated polycarbonate prepolymer having very low free PPDI content (typical < 0.1%) for easier management of health and safety during handling. ADIPRENE LFP 3940A yields high performance 93-96 Shore A hardness elastomers when cured with VIBRACURE® A 250 or HQEE. The high performance features of ADIPRENE LFP 3940A are due to PPDI (p-phenylene diisocyanate), a special building block that imparts exceptional properties to cast polyurethane elastomers. The unique combination of properties exhibited by PPDI-based prepolymers is superior to those available from standard prepolymers based on TDI or MDI. Features of ADIPRENE LFP 3940A include: Low Free PPDI Content Excellent hydrolytic stability, oil stability and thermal stability Long Pour Life Excellent Dynamics Good Tensile/Tear Strength Excellent Resilience&&

Product Description
Supplier	Chemtura
Generic	PUR+PC
Material Status	Commercial: Active
Features	Hydrolysis stability,Elastic,Good Tensile Strength,Good tear strength,Heat Stabilized
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	casting

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	94 to 96		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
100% strain	10.9	MPa	ASTM D412
300% strain	17.9	MPa	ASTM D412
tensile strength	52.4	MPa	ASTM D412
Tensile strain
fracture	550	%	ASTM D412
tear strength
cracking	26	kN/m	ASTM D470
Compression deformation			ASTM D395B
70℃，22 hr	33	%	ASTM D395B
100℃，22 hr	55	%	ASTM D395B
Basho’s elasticity	50	%	ASTM D2632

THERMAL	Nominal value	Unit
storage stability	5.0	min
stripping time	> 60	min
Post curing time
127℃	16	hr

Supplementary information	Nominal value	Unit
Dynamic characteristics
Storage Modulus：30℃	3.25E+8	dynes/cm²
Storage Modulus：150℃	2.60E+8	dynes/cm²
Tangent Delta：30℃	0.0220
Tangent Delta：150℃	0.0190

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.