ADPOLY TU-100 - SOLIAO

About
TU-100 is LDPE based adhesive resin containing anhydride. This grade shows a strong adhesion to PE, PA, EVOH, and it has polyolefin-like properties. In addition, its processability is excellent. TU-100 is mainly intended for use as an adhesive resin in multi-layer bottle.&&

Product Description
Supplier	LOTTE
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good bond
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	3.4 to 4.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	570	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	78.0	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method
Adhesive strength	> 3.00	kgf/2 cm	ASTM D903

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	38		ASTM D2240
tensile strength
yield	9.12	MPa	ASTM D638
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus	108	MPa	ASTM D790
bending strength	4.71	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.