ADSINT® TPU 80

About
AdSint® TPU 80 (thermoplastic Polyurethane) is a soft engineered white powder developed for the SLS technology. In comparison to other TPU developed for SLS, it has a lower hardness. Its unique characteristics are very high elongation, excellent physical properties combined with a rubber-like elasticity and a good abrasive as well as chemical resistance. Typical applications are shoe soles, designer clothes, orthopedic models, hoses, tubes, sealings and wheels. The printed parts deliver a very smooth surface. AdSint® TPU 80 can be used on 3D Systems machines. Parameters for printing will be provided. Due to its lower printing temperature (below 100°C), energy and time savings are possible. The recycling rate of 100% implies a high cost advantage.&&

About

AdSint® TPU 80 (thermoplastic Polyurethane) is a soft engineered white powder developed for the SLS technology. In comparison to other TPU developed for SLS, it has a lower hardness. Its unique characteristics are very high elongation, excellent physical properties combined with a rubber-like elasticity and a good abrasive as well as chemical resistance. Typical applications are shoe soles, designer clothes, orthopedic models, hoses, tubes, sealings and wheels. The printed parts deliver a very smooth surface. AdSint® TPU 80 can be used on 3D Systems machines. Parameters for printing will be provided. Due to its lower printing temperature (below 100°C), energy and time savings are possible. The recycling rate of 100% implies a high cost advantage.&&

Product Description
Generic	TPU
Material Status	Commercial: Active
Features	Good surface appearance,Good Tensile Strength,Good wear resistance,Solvent resistance
Availabilitys	Europe
Process Methods	3D Printing, Laser Sintering/Melting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05 to 1.15	g/cm³	ISO 61
Apparent density	0.55	g/cm³	ISO 1068
Average particle size
X50	56	µm	ISO 13320

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	17.0	MPa	ASTM D412
Tensile strain
fracture	600	%	ASTM D412
Compression deformation
23℃，72 hr	37	%
70℃，22 hr	72	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-34.0 to -30.0	℃	ISO 11357-2

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 20 ℃	83		ISO 868
Bending modulus
23℃	21.0 to 25.0	MPa	ISO 178
abrasion resistance	67.0 to 77.0	mm³	ISO 4649

Notes
1. Typical properties: these are not to be construed as specifications.
2. Packed
3. Die C
4. X Direction
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.