Adstif EA640G - SOLIAO

About
Adstif EA640G Developmental Grade Adstif HA640G is a polypropylene impact copolymer manufactured using the Spheripol process. Potential applications include extrusion of corrugated board and rigid sheet. End uses for such applications may be found in industrial packing and advertising boxes&&Adstif EA640G Adstif EA640G is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Adstif EA640G is a block copolymer particularly suitable for corrugated board and corrugated plastic for industrial packing. Adstif EA640G resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

About

Adstif EA640G Developmental Grade Adstif HA640G is a polypropylene impact copolymer manufactured using the Spheripol process. Potential applications include extrusion of corrugated board and rigid sheet. End uses for such applications may be found in industrial packing and advertising boxes&&Adstif EA640G Adstif EA640G is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Adstif EA640G is a block copolymer particularly suitable for corrugated board and corrugated plastic for industrial packing. Adstif EA640G resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Food contact compliance,Block Copolymer,Good melt strength,low-temperature impact resistance,Impact copolymer
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	1.3	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	90		ASTM D785
tensile strength
yield	27.5	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus	1570	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.