Adstif HA686J - SOLIAO

About
Adstif HA686J Adstif HA686J is a New Generation Thermoforming Grade for SPPF made by Basell’s “new process and additive formulation technology”. So, this product shows higher stiffness, impact strength, HDT, and better clarity than General Homo T/F grade. In addition, because Adstif HA686J is Homo PP, this product has better stretchability than General Homo T/F grade [So, suitable for SPPF (Solid Phase Pressure Forming) T/F application]. Adstif HA686J resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Adstif HA686J Adstif HA686J is a new generation thermoforming grade with improved processability in stretchability, and end use stiffness, impact strength, HDT and clarity. Typical customer applications are containers made by solid phase pressure forming (SPPF) / thermoforming or blow molding, such as drinking cups, yogurt cups, noodle cups, margarine tubs, dairy cups, trays and bottles for food, that can be hot fillable or microwavable for reheating of food.&&

About

Adstif HA686J Adstif HA686J is a New Generation Thermoforming Grade for SPPF made by Basell’s “new process and additive formulation technology”. So, this product shows higher stiffness, impact strength, HDT, and better clarity than General Homo T/F grade. In addition, because Adstif HA686J is Homo PP, this product has better stretchability than General Homo T/F grade [So, suitable for SPPF (Solid Phase Pressure Forming) T/F application]. Adstif HA686J resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Adstif HA686J Adstif HA686J is a new generation thermoforming grade with improved processability in stretchability, and end use stiffness, impact strength, HDT and clarity. Typical customer applications are containers made by solid phase pressure forming (SPPF) / thermoforming or blow molding, such as drinking cups, yogurt cups, noodle cups, margarine tubs, dairy cups, trays and bottles for food, that can be hot fillable or microwavable for reheating of food.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Clarity,Low odor,Food contact compliance,Excellent Processability,Homopolymer,Good Rigidity,High impact resistance
Availabilitys	Asia Pacific,Africa & Middle East
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Izod Notched Impact strength
23 ℃, injection molding	49	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature HDT
0.45 MPa, unannealed, injection molding	125	℃	ASTM D648
	150	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	108		ASTM D785
Tensile Strength
Injection Molding	36.3	MPa	ASTM D638
Tensile Strain
Injection Molding	10	%	ASTM D638

	1744	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.