Adstif HA849K - SOLIAO

About
Adstif HA849K Very high stiffness and high clarity polypropylene homopolymer for thermoforming. Features: Very high stiffness Good top load strength High clarity Low odor and taste transfer Very high heat resistance Hot fillable, microwavable Applications: High barrier packaging Thermoformed food containers Microwavable packaging&&Adstif HA849K Adstif HA849K is a very high stiffness and high clarity polypropylene homopolymer with very high stiffness, low odor transfer, very high heat resistance. Typical customer applications include thermoformed food containers, high barrier packaging, microwavable packaging that are hot fillable and microwavable with good top load strength.&&

About

Adstif HA849K Very high stiffness and high clarity polypropylene homopolymer for thermoforming. Features: Very high stiffness Good top load strength High clarity Low odor and taste transfer Very high heat resistance Hot fillable, microwavable Applications: High barrier packaging Thermoformed food containers Microwavable packaging&&Adstif HA849K Adstif HA849K is a very high stiffness and high clarity polypropylene homopolymer with very high stiffness, low odor transfer, very high heat resistance. Typical customer applications include thermoformed food containers, high barrier packaging, microwavable packaging that are hot fillable and microwavable with good top load strength.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Low odor,High Heat Resistance,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792-B
Melt Flow Rate
230℃，2.16kg	3.5	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	40.0	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus	2150	MPa	ASTM D790A

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	30	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	128	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.