Advance™ 400

About
Advance™ 400 Polypropylene Resin is a random co-polymer developed for thin wall injection moulding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures. Advance™ 400 Polypropylene Resin contains an antistatic additive. Typical Applications Thin wall packaging Food containers Cosmetic containers Aerosol dust covers&&

About

Advance™ 400 Polypropylene Resin is a random co-polymer developed for thin wall injection moulding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures. Advance™ 400 Polypropylene Resin contains an antistatic additive. Typical Applications Thin wall packaging Food containers Cosmetic containers Aerosol dust covers&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Controllable rheological,Food contact compliance,Random copolymer,Antistatic property
Availabilitys	Africa & Middle East
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.902	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	40	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, injection molding	28.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	11	%	ISO 527-2
Bending modulus
injection molding	1000	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
0 ℃, injection molding	2.0	kJ/m²
23 ℃, injection molding	5.0	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	67.0	℃	ISO 75-2/B
1.8 MPa, unannealed	47.0	℃	ISO 75-2/A
Vicat Softening Temp
—	127	℃	ISO 306/A
—	70.0	℃	ISO 306/B

optical performance	Nominal value	Unit	Test method
Transmittance
injection molding	85.0	%	ASTM D1003

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	180 to 200	°C
Barrel middle temperature	200 to 230	°C
Barrel front temperature	225	°C
Nozzle temperature	215	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.