Advanced-PP 1102L

About
Advanced-PP 1102L is a propylene homopolymer with general extrusion additivation with low water carry over. It is specificially suited for Raffia & Thermoforming Applications. Application Thermoformed Parts, Raffia, General Extrusion. Regulatory Information: The Grade Advanced-PP 1102L and additives incorporated comply with United States FDA Regulation 21CFR 177.1520 Olefin Polymers and European Regulation (EU) 10/2011 (and its amendments). Specific information is available upon request.&&

About

Advanced-PP 1102L is a propylene homopolymer with general extrusion additivation with low water carry over. It is specificially suited for Raffia & Thermoforming Applications. Application Thermoformed Parts, Raffia, General Extrusion. Regulatory Information: The Grade Advanced-PP 1102L and additives incorporated comply with United States FDA Regulation 21CFR 177.1520 Olefin Polymers and European Regulation (EU) 10/2011 (and its amendments). Specific information is available upon request.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	5.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	43	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
tensile strength
Yield, injection molding	33.1	MPa	ASTM D638
Tensile strain
Yield, injection molding	9.0	%	ASTM D638
Bending modulus
1% cut, injection molding	1240	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.