ADVANCENE™ EE-1802-BSB

About
ADVANCENE™ EE-1802-BSB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-BSB resin have very good tensile and toughness properties. Applications: Agricultural Film. Bag in Box. Cast Film. Blown Film. Bread Bags. Food Packaging. Form Fill and Seal Packaging. Freezer Film. Garment Film. General Packaging. Industrial Packaging. Institutional Can Liners. Lamination Film. Liners. Mulch Films. Multilayer Packaging Film. Packaging Films. Personal Care. Produce Bags on a Roll. Shoppers. Trash Can Liners.&&

About

ADVANCENE™ EE-1802-BSB is a part of a Butene LLDPE series designed for the Blown & Cast film process, offering high gloss and excellent draw down. Films made from ADVANCENE™ EE-1802-BSB resin have very good tensile and toughness properties. Applications: Agricultural Film. Bag in Box. Cast Film. Blown Film. Bread Bags. Food Packaging. Form Fill and Seal Packaging. Freezer Film. Garment Film. General Packaging. Industrial Packaging. Institutional Can Liners. Lamination Film. Liners. Mulch Films. Multilayer Packaging Film. Packaging Films. Personal Care. Produce Bags on a Roll. Shoppers. Trash Can Liners.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good flexibility,Good surface appearance,Smoothness,Good dissection,Renewable resources,High anti-blocking
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Secant modulus
1% secant, MD	190	MPa
1% secant, TD	220	MPa
tensile strength
MD, yield	11.0	MPa
TD, yield	10.0	MPa
MD, fracture	49.0	MPa
TD, fracture	29.0	MPa
Tensile strain
MD, fracture	600	%
TD, fracture	800	%
Drop hammer impact	66	g	ASTM D1709-A
Elmandorf tear strength
MD	85	g
TD	400	g

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	121	℃	ASTM D3418

optical performance	Nominal value	Unit	Test method
gloss
45°	76		ASTM D2457
Haze	4.4	%	ASTM D1003

Supplementary information	Nominal value	Unit	Test method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.