| About |
|---|
| ADVANCENE™ EE-4811-AAH High Density Polyethylene Resin is a high molecular weight, high-density polyethylene copolymer that has been designed specically for tubular film extrusion. Its broad molecular weight distribution and density successfully combine excellent performance at high extrusion rates with high film strength and rigidity. Tubular films of ADVANCENE™ EE-4811-AAH Resin are recommended for high strength grocery sacks. shopping bags and notion and millinery bags. The excellent drawdown characteristic of this product permits production of high-quality thin films for multiwall sack liners and replacements for thin paper products. The combination of strength and drawdown makes this resin ideal for downgauging in many applications. Films are readily treated and printed to give high-quality graphics. ADVANCENE™ EE-4011-AAH Resin is compatible with color concentrates, thus permitting the production of a variety of colored films that serve as protective and attractive decorative wraps. Main Characteristics: Hexene High Density Resin. High film strength. Excellent processability and drawdown.&& |
| Product Description | |
|---|---|
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good dissection,Wide molecular weight distribution,Renewable resources,Good Printability,High molecular weight,Copolymer,High density,Hexene copolymers,Good coloring |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.948 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 11 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 1% secant | 814 | MPa | ASTM D790 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 13 | µm | |
| Membrane puncture strength | 1.20 | J | |
| tensile strength | |||
| MD, yield, 13 µ m | 27.6 | MPa | |
| TD, yield, 13 µ m | 24.1 | MPa | |
| MD, fracture, 13 µ m | 55.2 | MPa | |
| TD, fracture, 13 µ m | 53.8 | MPa | |
| Tensile strain | |||
| MD, fracture, 13 µ m | 270 | % | |
| TD, fracture, 13 µ m | 350 | % | |
| Drop hammer impact | |||
| 13 µm | 150 | g | ASTM D1709-A |
| Elmandorf tear strength | |||
| MD：13 µm | 70 | g | |
| TD：13 µm | 150 | g |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 124 | ℃ | ASTM D1525 |
| Melting peak temperature | 132 | ℃ | ASTM D3418 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 216 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Univation Method |
| 3. Method B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |