ADVANCENE™ EM-4810-AAH

About
ADVANCENE™ EM-4810-AAH HDPE Resin is a polymer with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability, which contribute to uniform wall thickness in large parts. ADVANCENE™ EM-4810-AAH HDPE Resin is ideal for blow molding containers of > 80 liters closed head shipping containers and other similar pans. The broad distribution also provides outstanding environmental stress crack resistance (ESCR) at a good rigidity. Because of these characteristics, a wide variety of products, such as industrial chemicals, latex paints, printing inks, foodstuffs, adhesives and other chemical specialties may be packaged in containers produced from this resin. The smooth surface of molded parts is readily treated and printed for high quality applications. Main Characteristics: Outstanding environmental stress crack resistance. Excellent parison melt strength/low sag. Good extrudability/processability. Good rigidty.&&

About

ADVANCENE™ EM-4810-AAH HDPE Resin is a polymer with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability, which contribute to uniform wall thickness in large parts. ADVANCENE™ EM-4810-AAH HDPE Resin is ideal for blow molding containers of > 80 liters closed head shipping containers and other similar pans. The broad distribution also provides outstanding environmental stress crack resistance (ESCR) at a good rigidity. Because of these characteristics, a wide variety of products, such as industrial chemicals, latex paints, printing inks, foodstuffs, adhesives and other chemical specialties may be packaged in containers produced from this resin. The smooth surface of molded parts is readily treated and printed for high quality applications. Main Characteristics: Outstanding environmental stress crack resistance. Excellent parison melt strength/low sag. Good extrudability/processability. Good rigidty.&&

Product Description
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Wide molecular weight distribution,Good Printability,High molecular weight,High density,High ESCR
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.948	g/cm³	ASTM D792
Melt Flow Rate
190℃，21.6kg	10	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 100% non-ionic surfactant, F50	> 1500	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Tensile impact strength
—	462	kJ/m²	ASTM D1822
—	462	kJ/m²	ISO 8256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	66.0	℃	ASTM D648
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	127	℃	ASTM D1525
Melting peak temperature	130	℃	ASTM D3418
Crystallization peak temperature
DSC	114	℃	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	57		ASTM D2240
tensile strength
yield	22.8	MPa
fracture	36.5	MPa
Tensile strain
yield	6.0	%
fracture	900	%
Bending modulus
2% secant	855	MPa	ASTM D790-B

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type S
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.