Aegis® H95XC - SOLIAO

About
Aegis® H95XC is medium viscosity nylon 6 extrusion grade homopolymer with softness & transparency additives for filament applications (Typical tenacities 5.0-8.0 gpd).&&

Product Description
Supplier	Honeywell
Generic	PA6
Material Status	Commercial: Active
Features	Homopolymer
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	ASTM D1505
water content	< 0.12	%	ASTM D6869
Relative viscosity
@ 96% SAV	3.25
viscosity
FAV	80.0 to 96.0		ASTM D789

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	220	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.