| About |
|---|
| Oil resistant, flexible, halogen free, flame-retardant, silane crosslinkable insulation and sheathing for cable applications This is a flame-retardant, silane crosslinkable, flexible polyolefin compound curable by exposure to moist conditions. The graft component CT09-38 is mixed with a crosslinking catalyst masterbatch CT06-81A generally in the ratio 97:3. The CT09-38:CT08-81A compound has been developed to meet the requirements of IEC 92-359 SHF2 and EN50264 EM104 ship wiring and railway standards. The product shows good flexibility and confers tough sheathing.&& |
| Product Description | |
|---|---|
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Crosslinked,Halogen free,Flame Characteristics,Grease resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.51 | g/cm³ | BS 2782 620A |
| Melt Flow Rate | |||
| 190℃，21.6kg | 1.5 | g/10min | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 10.0 | MPa | IEC 60811-1-1 |
| Tensile strain | |||
| fracture | 140 | % | IEC 60811-1-1 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength | |||
| 100 ℃, 24 hours, in IRM 902 oil | -26 | % | |
| 100 ℃, 72 hr, in IRM 902 oil | -30 | % | |
| 120℃，168 hr | 25 | % | IEC 60811-1-2 |
| Changes in tensile stress during fracture | |||
| 100 ℃, 24 hours, in IRM 902 oil | -25 | % | |
| 100 ℃, 72 hr, in IRM 902 oil | -24 | % | |
| 120℃，168 hr | -10 | % | IEC 60811-1-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermosetting | IEC 60811-2-1 | ||
| Elongation under load: 20 N/cm ²， 200 ℃ | 60 | % | IEC 60811-2-1 |
| Maximum permanent elongation after cooling | 5.0 | % | IEC 60811-2-1 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 33 | % | ISO 4589-2 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Halogen Acid Gas Evolution | < 0.50 | % | IEC 60754-1 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 100 | °C | |
| Barrel 2 zone temperature | 130 | °C | |
| Barrel 3 zone temperature | 145 | °C | |
| Barrel 4 zone temperature | 155 | °C | |
| Head temperature | 160 | °C | |
| Nozzle temperature | 165 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |