AFFINITY™ EG 8100G

About
General purpose plastomer Excellent impact properties in blends with polypropylene and polyethylene Highly flexible with good elastic recovery High clarity Breathable (high O2 and CO2 transmission rates) Low temperature sealability Complies with U.S. FDA FCN 424 (See NOTES 1) Consult the regulations for complete details. (See NOTES 2) AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure. Complies with: CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) EU No 10/2011 U.S. FDA FCN 424 Consult the regulations for complete details.&&

About

General purpose plastomer Excellent impact properties in blends with polypropylene and polyethylene Highly flexible with good elastic recovery High clarity Breathable (high O2 and CO2 transmission rates) Low temperature sealability Complies with U.S. FDA FCN 424 (See NOTES 1) Consult the regulations for complete details. (See NOTES 2) AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure. Complies with: CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) EU No 10/2011 U.S. FDA FCN 424 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	POP
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	46.0	℃	ASTM D1525
Melting temperature
DSC	55.0	℃	Internal Method

Notes
1. Conditions of Use A through H
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.