AFFINITY™ EG 8200G

About
AFFINITY* EG 8200G Polyolefin Plastomer is produced via INSITE* Technology from Dow Plastics. This is an ethylene alpha-olefin copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer cast film and in blends with other polyolefins to enhance clarity, sealability and toughness of structure. General purpose plastomer Excellent impact properties in blends with polypropylene and polyethylene Excellent flow characteristics Highly flexible with good elastic recovery Complies with: U.S. FDA FCN 424 Canadian HPFP No Objection Consult the regulations for complete details.&&

About

AFFINITY* EG 8200G Polyolefin Plastomer is produced via INSITE* Technology from Dow Plastics. This is an ethylene alpha-olefin copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer cast film and in blends with other polyolefins to enhance clarity, sealability and toughness of structure. General purpose plastomer Excellent impact properties in blends with polypropylene and polyethylene Excellent flow characteristics Highly flexible with good elastic recovery Complies with: U.S. FDA FCN 424 Canadian HPFP No Objection Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	POP
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	5.0	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	45.0	℃	ASTM D1525
Melting temperature
DSC	63.0	℃	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.