About |
---|
AFFINITY* HT1285G Polyolefin Plastomer (POP) is specifically designed as a high performance sealant for demanding packaging applications. AFFINITY HT 1285G provides high packaging integrity through improved hot tack strength, enhanced caulkability, superior seal though contamination, and low temperature seal initiation. It helps enable hermetic packaging on today’s high speed packaging lines or with demanding substrates, and supports reducing sealant failure and potential related food waste. AFFINITY HT 1285G has been developed for processing on Cast, Blown, and Extrusion Coating film production lines. High integrity sealant layer in flexible packaging Low seal initiation temperature Excellent hot tack strength Excellent taste and odor profile Superior seal through contamination Complies with: U.S. FDA FCN 424 EU, No 10/2011 Consult the regulations for complete details.&& |
Product Description | |
---|---|
Supplier | DOW |
Generic | POP |
Material Status | Commercial: Active |
Availabilitys | North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.898 | g/cm³ | ASTM D792 |
Melt Flow Rate | |||
190℃,2.16kg | 6.0 | g/10min | ASTM D1238 |
film | Nominal value | Unit | Test method |
---|---|---|---|
film thickness | |||
test | 25 | µm | |
tensile strength | ASTM D882 | ||
MD, yield, 25 µ m | 5.80 | MPa | ASTM D882 |
TD, yield, 25 µ m | 5.30 | MPa | ASTM D882 |
MD, fracture, 25 µ m | 48.0 | MPa | ASTM D882 |
TD, fracture, 25 µ m | 30.0 | MPa | ASTM D882 |
Tensile strain | ASTM D882 | ||
MD, fracture, 25 µ m | 470 | % | ASTM D882 |
TD, fracture, 25 µ m | 720 | % | ASTM D882 |
Drop hammer impact | |||
25 µm | 290 | g | ASTM D1709-A |
Elmandorf tear strength | ASTM D1922 | ||
MD:25 µm | 78 | g | ASTM D1922 |
TD:25 µm | 410 | g | ASTM D1922 |
Initial sealing temperature | 88.0 | ℃ | ASTM D1525 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | 81.0 | ℃ | ASTM D1525 |
Melting temperature | |||
DSC | 96.0 | ℃ | Internal Method |
optical performance | Nominal value | Unit | Test method |
---|---|---|---|
gloss | |||
45 °, 25 µ m, cast thin film | 91 | ASTM D2457 | |
Haze | |||
25 µ m, cast thin film | 4.0 | % | ASTM D1003 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. Method B |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |