AGILITY™ 1200 Performance LDPE

About
AGILITY™ 1200 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. It also has excellent shrink and good optics performance in blends with LLDPE resins.&&

Product Description
Supplier	DOW
Generic	LDPE
Material Status	Commercial: Negative
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.25	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	51	µm
Secant modulus			ASTM D882
2% secant, MD: 51 µ m	200	MPa	ASTM D882
2% secant, TD: 51 µ m	228	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield	11.0	MPa	ASTM D882
TD, yield	11.0	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	200	%	ASTM D882
TD, fracture	500	%	ASTM D882
Drop hammer impact	170	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD	220	g	ASTM D1922
TD	210	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45°	34		ASTM D2457
Haze	18	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.