AKOLYT KM 900 - SOLIAO

About
Selenis Akolyt KM 900 copolyester has been specifically developed for the extrusion of technical films for furniture lamination, graphics arts, and the card film industry. Films made from Selenis Akolyt KM 900 allow excellent decorative capability, permitting your customers unlimited design freedom and full personalisation of the final application. With the Selenis Akolyt KM 900 grade you can choose a variety of finishes to your films, such as embossing techniques and glossy or leather-like surfaces. The exceptional clarity of films produced from Selenis Akolyt KM 900 allow reverse printing technique, enhancing printing optics whilst maximizing artwork protection. Elongation of films produced from Selenis Akolyt KM 900 permit thermoformed deep drawing, at the same time as its relatively low Tg grants energy cost savings while guaranteeing perfect adhesion to the substrates. Proven chemical resistance against common household detergents makes Selenis Akolyt KM 900 the perfect choice for films that will resist everyday weathering.&&

About

Selenis Akolyt KM 900 copolyester has been specifically developed for the extrusion of technical films for furniture lamination, graphics arts, and the card film industry. Films made from Selenis Akolyt KM 900 allow excellent decorative capability, permitting your customers unlimited design freedom and full personalisation of the final application. With the Selenis Akolyt KM 900 grade you can choose a variety of finishes to your films, such as embossing techniques and glossy or leather-like surfaces. The exceptional clarity of films produced from Selenis Akolyt KM 900 allow reverse printing technique, enhancing printing optics whilst maximizing artwork protection. Elongation of films produced from Selenis Akolyt KM 900 permit thermoformed deep drawing, at the same time as its relatively low Tg grants energy cost savings while guaranteeing perfect adhesion to the substrates. Proven chemical resistance against common household detergents makes Selenis Akolyt KM 900 the perfect choice for films that will resist everyday weathering.&&

Product Description
Generic	PETG
Material Status	Commercial: Active
Features	Weather resistance is good,Good Clarity,Renewable resources,Good Printability,Food contact compliance,Good bond,Solvent resistance
Availabilitys	North America,Latin America,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.27	g/cm³	ASTM D792
Apparent density	0.73	g/cm³
Intrinsic viscosity	0.74 to 0.78	dl/g	ISO 1628-5
Color b	< 3.00		ASTM D6290
Color L	> 64.0		ASTM D6290
Particle Shape	Cylindrical
Particle size	270 to 370	mg/20 chips
humidity	< 0.30	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	85.0	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	65	°C
Drying time	5.0 to 6.0	hr
Recommended maximum moisture content	4.0E-3	%
Melt temperature	180 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.