| About |
|---|
| AKROMID® T5 GF 50 6 black (6331) is a 50% glass fibre reinforced, inorganic high heat stabilised polyphthalamide with very high stiffness and strength Parts with tight dimensional tolerances even under high mechanical load.&& |
| Product Description | |
|---|---|
| Generic | PPA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Dimensional Stability,High Heat Resistance,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.61 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 18000 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 275 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 2.5 | % | ISO 527-2/5 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 325 | ℃ | DIN EN 11357-1 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ash Content | 50 | % | ISO 1172 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |