| About |
|---|
| Akulon®是高性能PA6和PA66家族，客户遍布全球，广泛应用于汽车、电子电气、家具、包装等行业。&&我们提供注塑级、吹塑级和挤出级的Akulon®牌号，其中挤出级包括阻隔膜、棒材、波纹管和单层多层膜。&&用此材料注塑时，在设计简单和卓越的机械性能间能达到完美的平衡，应用种类多，温度范围广。用作挤出时，Akulon®的强度、回弹性和加工简便都是市场标杆。 |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | High liquidity,Halogen free |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.43 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD | 0.28 | % | ISO 294-4 |
| Shrinkage rate | |||
| MD | 1.31 | % | ISO 294-4 |
| Spiral flow length 1.0 mm 800 bar | 87 | mm | – |
| Spiral flow length 1.0 mm 1000 bar | 104 | mm | – |
| Spiral flow length 1.0 mm 1200 bar | 121 | mm | – |
| temperature | Nominal value | Unit | Test method |
|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 11000 | MPa | ISO 527-1-2 |
| Tensile modulus | |||
| -40℃ | 1130 | MPa | ISO 527-1-2 |
| Tensile modulus | |||
| 100℃ | 5800 | MPa | ISO 527-1-2 |
| Tensile modulus | |||
| 120℃ | 5300 | MPa | ISO 527-1-2 |
| Tensile modulus | |||
| 140℃ | 4800 | MPa | ISO 527-1-2 |
| Tensile modulus | |||
| 160℃ | 4600 | MPa | ISO 527-1-2 |
| Tensile modulus, low thickness | 11000 | MPa | ISO 527-1/-2 |
| Tensile modulus (test thickness) | 1 | mm | ISO 527-1/-2 |
| Fracture stress | 150 | MPa | ISO 527-1/-2 |
| Fracture stress (-40 ° C) | 200 | MPa | ISO 527-1/-2 |
| Fracture stress (100 ° C) | 87 | MPa | ISO 527-1/-2 |
| Fracture stress (120 ° C) | 79 | MPa | ISO 527-1/-2 |
| Fracture stress (140 ° C) | 72 | MPa | ISO 527-1/-2 |
| Fracture stress (160 ° C) | 66 | MPa | ISO 527-1/-2 |
| Fracture stress (low thickness) | 140 | MPa | ISO 527-1/-2 |
| Fracture strain (test thickness) | 1 | mm | ISO 527-1/-2 |
| Tensile strain | |||
| fracture | 2.8 | % | ISO 527-1/2 |
| Fracture strain (-40 ° C) | 3 | % | ISO 527-1/-2 |
| Fracture strain (120 ° C) | 5.4 | % | ISO 527-1/-2 |
| Fracture strain (140 ° C) | 5.7 | % | ISO 527-1/-2 |
| Fracture strain (160 ° C) | 6 | % | ISO 527-1/-2 |
| Fracture strain (low thickness) | 2.6 | % | ISO 527-1/-2 |
| Fracture strain (test thickness) | 1 | mm | ISO 527-1/-2 |
| Bending modulus | 9450 | MPa | ISO 178 |
| bending strength | 225 | MPa | ISO 178 |
| Weld seam strength (thickness 1) | 47 | MPa | ISO 527-1/-2 |
| Elongation rate of weld seam (thickness 1) | 0.7 | % | ISO 527-1/-2 |
| Thickness testing | 1 | mm | ISO 527-1/-2 |
| Weld seam strength (thickness 2) | 45 | MPa | ISO 527-1/-2 |
| Elongation rate of weld seam (thickness 2) | 0.5 | % | ISO 527-1/-2 |
| Thickness testing | 4 | mm | ISO 527-1/-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| 10℃ / min | 260 | ℃ | ISO 11357-1/-3 |
| Glass transition temperature | |||
| 10℃/min | 60 | °C | ISO 11357-1/-2 |
| Hot deformation temperature | |||
| 1.8 MPa | 247 | ℃ | ISO 75-1/2 |
| Linear coefficient of thermal expansion | |||
| TD | 2.1E-5 | /℃ | ISO 11359-1/-2 |
| MD | 6.7E-5 | /℃ | ISO 11359-1/-2 |
| Combustibility at a thickness of h | V-0 | class | IEC 60695-11-10 |
| The thickness of the test specimen used for testing | 3 | mm | IEC 60695-11-10 |
| Combustibility at a thickness of h | V-0 | class | IEC 60695-11-10 |
| Ball pressure temperature | 255 | °C | IEC 60695-10-2 |
| Glow wire combustion index GWFI | 960 | °C | IEC 60695-2-12 |
| GWFI (thickness (1)) | 0.4 | mm | IEC 60695-2-12 |
| Glow wire combustion index GWFI | 960 | °C | IEC 60695-2-12 |
| GWFI (thickness (2)) | 3 | mm | IEC 60695-2-12 |
| Glow wire ignition temperature GWIT | 800 | °C | IEC 60695-2-13 |
| GWIT (thickness (1)) | 0.4 | mm | IEC 60695-2-13 |
| Glow wire ignition temperature GWIT | 825 | °C | IEC 60695-2-13 |
| GWIT (thickness (2)) | 3 | mm | IEC 60695-2-13 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Relative permittivity | |||
| 100 Hz | 4.24 | IEC 60250 | |
| Relative permittivity | |||
| 1 MHz | 3.87 | IEC 60250 | |
| Relative permittivity | |||
| 1 GHz | 3.6 | IEC 60250 | |
| Dissipation factor | |||
| 100 Hz | 100 | E-4 | IEC 60250 |
| Dissipation factor | |||
| 100 Hz | 100 | E-4 | IEC 60250 |
| Dissipation factor | |||
| 1 GHz | 0.0102 | E-4 | IEC 60250 |
| Volume resistivity | >1E15 | ohms·cm | IEC 60093 |
| Surface resistivity | >1E+15 | ohms | IEC 60093 |
| Dielectric strength | 40.7 | kV/mm | IEC 60243-1 |
| Compared to the leakage tracing index | 600 | V | IEC 60112 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Water absorption rate | 4.9 | % | ISO 62 |
| Water absorption rate | |||
| 23 ℃, 24 hours, in water | 1 | % | ISO 62 |
| Moisture absorption rate | 1.6 | % | Sim. to ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 68 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 10 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |