| About |
|---|
| Akulon®是高性能PA6和PA66家族，客户遍布全球，广泛应用于汽车、电子电气、家具、包装等行业。&&我们提供注塑级、吹塑级和挤出级的Akulon®牌号，其中挤出级包括阻隔膜、棒材、波纹管和单层多层膜。&&用此材料注塑时，在设计简单和卓越的机械性能间能达到完美的平衡，应用种类多，温度范围广。用作挤出时，Akulon®的强度、回弹性和加工简便都是市场标杆。 |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High Viscosity,Nucleation,Food contact compliance,Lubricating |
| Technical Data | |||
|---|---|---|---|
| Other performance | Nominal value | Unit | Test method |
| Water absorption rate | 9.5 | % | ISO 62 |
| Moisture absorption rate | 2.5 | % | Sim. to ISO 62 |
| Material characteristics | Nominal value | Unit | Test method |
|---|---|---|---|
| Viscosity number | 210 | cm³/g | ISO 307, 1157, 1628 |
| Relative solution viscosity | 3.2 | – | DSM method |
| Melt viscosity (260 ° C) | 1120 | Pa s | DSM method, 260 °C |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Elastic modulus | 465 | MPa | DSM-Method, 50 mm/min |
| Yield stress, parallel | 34 | MPa | ISO 527-3 |
| Maximum stress, parallel | 96 | MPa | ISO 527-3 |
| Maximum strain, parallel | 350 | % | ISO 527-3 |
| tear strength | |||
| parallel | 32 | ISO 6383-1 | |
| Puncture resistance | 1230 | J/m | DSM-Method |
| friction coefficient | |||
| static state | 1.4 | ISO 8295 |
| Other properties (thin film) | Nominal value | Unit | Test method |
|---|---|---|---|
| transparency | 85 | % | DSM method |
| Oxygen transmittance at 23 ° C/0% RH | 20 | cm³/(m²*d*bar) | DIS 15105-1/-2 |
| Oxygen transmittance at 23 ° C/85% RH | 31 | cm³/(m²*d*bar) | DIS 15105-1/-2 |
| Moisture transmittance (23 ° C/85% RH) | 35 | g/(m²*d) | DIS 15106-1/-3 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| 10℃ / min | 220 | ℃ | ISO 11357-1/-3 |
| Linear coefficient of thermal expansion | |||
| TD | 0.9E-4 | /℃ | ISO 11359-1/-2 |
| specific heat | 1550 | J/(kg K) | – |
| Average specific heat 20-150 ° C | 2250 | J/(kg K) |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |