| About |
|---|
| High Viscosity, Neat resin, Extrusion&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High Viscosity,Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 465 | MPa | Internal Method |
| tensile strength | |||
| MD, yield | 34.0 | MPa | |
| fracture | 96.0 | MPa | |
| Tensile strain | |||
| fracture | 350 | % | ISO 527-2 |
| friction coefficient | |||
| dynamic | 0.80 | ||
| static state | 1.4 | ||
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 50 | µm | |
| Membrane puncture resistance | 1230 | J/cm³ | Internal Method |
| Pant tear resistance | |||
| MD | 32.0 | N/mm | ISO 6383-1 |
| Oxygen transfer rate | |||
| 23℃，0% RH | 20 | cm³/m²/24 hr | |
| 23℃，85% RH | 31 | cm³/m²/24 hr | |
| Water vapor transmittance | |||
| 23℃，85% RH | 35 | g/m²/24 hr | DIS 15106-1/-3 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD | 9.0E-5 | 1/℃ | ISO 11359-2 |
| specific heat | 1550 | J/kg/℃ |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Clarity | 85 | % | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| RSV（formic acid） | 3.20 | Internal Method |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Viscosity number | 210 | cm³/g | ISO 307 |
| Apparent viscosity of melt | |||
| 260℃ | 1120 | Pa·s | Internal Method |
| mean specific heat | |||
| 20 to 150 ℃ | 2250 | J/kg/℃ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 270 | °C | |
| Barrel 2 zone temperature | 270 | °C | |
| Barrel 3 zone temperature | 270 | °C | |
| Barrel 4 zone temperature | 270 | °C | |
| Barrel 5 zone temperature | 270 | °C | |
| Nozzle temperature | 270 | °C | |
| Traction roller | 110 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. Flow |
| 4. 1g/100ml |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |