| About |
|---|
| Alathon 8005M-3 is a high molecular weight, high density polyethylene copolymer with broad, bimodal molecular weight distribution. Typical applications are non-pressure-rated pipes. Alathon 8005M-3 meets the following standard: ASTM D3350 Cell Classifications: PE445540A&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Wide molecular weight distribution,Copolymer |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.070 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | > 1000 | hr | |
| 100% non-ionic detergent, F50 | > 1000 | hr | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 24.4 | MPa | |
| fracture | 35.6 | MPa | |
| Tensile strain | |||
| fracture | 840 | % | ASTM D638 |
| Bending modulus | |||
| 2% secant | 938 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 76.0 | ℃ | ASTM D648 |
| Oxygen sensing time | |||
| 200℃ | > 40 | min | ASTM D3895 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |