| About |
|---|
| Alathon L4907 is a high molecular weight high density copolymer with broad bimodal molecular weight distribution. This resin exhibits high density and stiffness and is selected by customers for use in grooved feed and smooth bore equipment. Typical applications include merchandise bags, grocery sacks, roll stock and produce bags.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Food contact compliance,High molecular weight,Copolymer |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.075 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| TD | 1140 | MPa | ASTM D882 |
| MD | 951 | MPa | ASTM D882 |
| tensile strength | |||
| TD, fracture | 53.1 | MPa | ASTM D882 |
| TD, yield | 28.3 | MPa | ASTM D882 |
| MD, fracture | 82.0 | MPa | ASTM D882 |
| MD, yield | 34.5 | MPa | ASTM D882 |
| Tensile strain | |||
| TD, fracture | 500 | % | ASTM D882 |
| MD, fracture | 320 | % | ASTM D882 |
| Drop hammer impact | 260 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 9.0 | g | ASTM D1922 |
| tear strength | |||
| TD | 97 | g | ASTM D1922 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |