| About |
|---|
| Alathon M6020SB is a medium molecular weight high density polyethylene homopolymer for use in blown film applications. Typical applications include those with low WVTR requirements.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | MMW-HDPE |
| Material Status | Commercial: Active |
| Features | Low speed solidification point,Moisture resistance,Good sensory characteristics.,Poor moisture permeability,High density,Block resin,Homopolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.959 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| MD | 1010 | MPa | |
| TD | 1320 | MPa | |
| tensile strength | |||
| MD, yield | 28.6 | MPa | |
| TD, yield | 35.4 | MPa | |
| MD, fracture | 46.1 | MPa | |
| TD, fracture | 25.9 | MPa | |
| Tensile strain | |||
| MD, fracture | 870 | % | |
| TD, fracture | 650 | % | |
| Elmandorf tear strength | |||
| MD | 32 | g | |
| TD | 90 | g |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |