| About |
|---|
| Alathon M6080WC is a natural high density polyethylene homopolymer with a narrow molecular weight distribution selected by customers for use as primary insulation for coaxial cable applications including gas-injected or chemically expanded insulation. This resin provides enhanced processability and stiffness and exhibits excellent color, low odor and good processing stability. Alathon M6080WC meets the requirements of the following: ASTM D 1248, Type III, Class A, Category 3, Grade E11; Federal LP390C, Type II, Class H, Category 3, Grade 4.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Low odor,Weight distribution,Homopolymer |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 8.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 67 | ASTM D2240 | |
| tensile strength | |||
| fracture | 21.4 | MPa | ASTM D638 |
| yield | 26.9 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 1900 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1320 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 130 | ℃ | ASTM D1525 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 3.0E+17 | ohms·cm | ASTM D257 |
| Dielectric strength | 28 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 MHz | 2.36 | ASTM D1531 | |
| Dissipation factor | |||
| 1 MHz | 3.0E-5 | ASTM D1531 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 149 to 163 | °C | |
| Barrel 2 zone temperature | 177 to 204 | °C | |
| Barrel 3 zone temperature | 204 to 232 | °C | |
| Barrel 4 zone temperature | 246 to 260 | °C | |
| Barrel 5 zone temperature | 246 to 260 | °C | |
| Connector temperature | 246 to 260 | °C | |
| Melt temperature | 246 to 260 | °C | |
| Nozzle temperature | 246 to 260 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |