| About |
|---|
| ALCOLOR® ABS A WT1478-04 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by blow molding, extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Characteristics include: RoHS Compliant High Flow&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | High liquidity,Machinable,Low to no calcium content |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| thermal stability | |||
| Colorant | < 300 | ℃ | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Dosage | 3.0 | % | |
| Light Fastness Colorant | Blue Woolscale 7 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Desiccant desiccant | 80 | °C | |
| Hot air dryer | 80 | °C | |
| Drying time | |||
| Desiccant desiccant | 3.0 to 6.0 | hr | |
| Hot air dryer | 2.0 to 4.0 | hr | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |